Polarization lidar operation for measuring backscatter phase matrices of oriented scatterers
We describe implementation and demonstration of a polarization technique adapted for lidar to measure all unique elements of the volume backscatter phase matrix. This capability allows for detection of preferential orientation within a scattering volume, and may improve scattering inversions on oriented ice crystals. The technique is enabled using a Mueller formalism commonly employed in polarimetry, which does not require the lidar instrument be polarization preserving. Instead, the accuracy of the polarization measurements are limited by the accuracy of the instrument characterization. A high spectral resolution lidar at the National Center for Atmospheric Research was modified to demonstrate this polarization technique. Two observations where the instrument is tilted off zenith are presented. In the first case, the lidar detects flattened large raindrops oriented along the same direction due to drag forces from falling. The second case is an ice cloud approximately 5 km above lidar base that contains preferentially oriented ice crystals in a narrow altitude band.
document
http://n2t.net/ark:/85065/d7hh6kvg
eng
geoscientificInformation
Text
publication
2016-01-01T00:00:00Z
publication
2012-12-31T00:00:00Z
Copyright 2012 Optical Society of America. This paper was published in Applied Optics and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: [http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-20-28-29553]. Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law.
None
OpenSky Support
UCAR/NCAR - Library
PO Box 3000
Boulder
80307-3000
name: homepage
pointOfContact
OpenSky Support
UCAR/NCAR - Library
PO Box 3000
Boulder
80307-3000
name: homepage
pointOfContact
2023-08-18T18:26:32.927516